Cylindrical Roller Bearings

Cylindrical Roller Bearings
Author :Admin | Publish Date:2012-01-14 16:47:46

Due to the line contact involving rolling elements and raceways, cylindrical roller bearings get higher radial load capacity and they are suited to high-speed software programs. Together with a excessive strength cage design within pressed steel, the most cylindrical roller bearings involve machined brass or polyamide and provide low noise, low heating generation and, for much more difficult applications, could be provided in a variety of advanced special materials.

N Style single strip - N style cylindrical roller bearings get two machined flanges inside inner ring with no flanges on the outer ring, with rollers and cage on the inner ring. Much like the NU style, the N doesn't have thrust load carrying capability.

NU style single strip - NU style cylindrical roller bearings get two machined flanges inside outer ring with no flanges in the inner ring.

NJ style single strip - NJ style cylindrical roller bearings get two machined flanges inside outer ring plus a machined flange on one side in the inner ring. The roller and cage assembly is the outer ring. The integral flange relating to the inner ring enables this bearing to deal with an axial load.

NH style single strip - NH style cylindrical roller bearings have two machined flanges in the outer ring accompanied by a machined flange on one side in the inner ring. A special-design inner ring enables utilization of a stabilizing ring to the non-flange side. Consequently, these bearings can carry axial a whole lot in both directions. The roller and cage assembly is mounted in the outer ring.

NF style single strip - NF style cylindrical roller bearings get two machined flanges in the inner ring and additional flange in the external ring, with roller and cage on the inner ring. Much such as the NJ bearing, these bearings possess some thrust load capability.

NUP style single strip - NUP style cylindrical roller bearings are such as the NJ style and come with a special ring called a thrust collar. Mounted on the non-flange side of your inner ring, the thrust collar allows the bearing to maintain an axial load in both directions. The thrust collar extends away from your bearing on one side, therefore the dimensions along the inner ring is slightly above that of the external ring.

Double row designs (NN, NNU) - Increase Row cylindrical roller bearings are denoted by two N's inside part number (i. g., NN or NNU). The length of these can be from the Super Precision component of this catalog and may be ordered with standard perfection.

Constant Caster Roller Bearings - These are generally 2-split bearing units on the highly reliable design and get a long service existence. Cylindrical roller bearings with self-aligning rings that has a proper alignment function.

S-Type - Sealed-Clean Bearings for chain conveyors demonstrate a better efficiency under high environment and wet conditions for a longer period by having an better sealing system. These types of bearings are packed with a quality grease of high thermal resistance and longevity.

Four Row Cylindrical Roller Bearings - Usually are popular roll neck bearings giving several advantages. First, the inner ring is separable form the outer ring and rollers so that the inner ring to keep with the roll all through grinding processes. This ensures precise concentricity and minimal run-out providing for excessive rolling accuracy. Second of all, this design enables greater radial load carrying together with higher operating speeds. Four row cylindricals should be used along with a thrust bearing that is normally a two row taper, angular get hold of ball bearings, or perhaps a heavy groove ball bearing according to the thrust load present.

Contact Us

Copyright © 2024 Timson Power Technology(shanghai)Co., Ltd All rights reserved. TEL:0086-021-32525340 FAX:0086-021-32525340 Email:shh@dmsw.com